COMPOSITES EUROPE 2012 Blog

This year, once again, the AVK conference is the opening event of the COMPOSITES EUROPE trade fair, which is an important market place for your business with participants from the every stage of the industry’s value chain from 27 – 29 September.
The presentation of the AVK Innovation Award and Composites Night frame the event and provide an opportunity for informal communication.

The International AVK Conference in the ICS International Congress Center Stuttgart has a brand new concept.

In two series of lectures, prominent experts offer their insights into the many and diverse applications for fibre reinforced plastics. In order to reflect the needs of the different interest groups even more closely at the conference, the two series are divided into thematic blocks presented by executives and technology specialists respectively.

The speakers will focus on current developments and innovations in technologies, materials and new processes as well as on the general condition of the GRP and CRP market.
Some of the fascinating lectures include:

• “Structural lightweight applications made from thermoplastic composites” by Joachim Graefe, Quadrant Plastic Composites AG
• “Thermoplastic composites for the A350 XWB” by Dr. Klaus Edelmann, Airbus Operations GmbH.
• Dr. Walter Aichholzer of Mercedes-Benz talks about the SMC decklid used in the premium automotive segment.

AVK represents the interests of all companies and institutions in the value chain involving components made of fibre-reinforced plastics and engineering thermosets

In a special lecture block “Research for practical application” professors from renowned universities and institutes report on trends, comparative studies of materials, series manufacturing applications and the wide range of design possibilities offered by fibre reinforced plastics.
The conference closes with a panel discussion titled “The future of fiber composites and plastics in the automotive sector” in which well-known participants from the automotive industry and its suppliers consider the current state of technology.

Have a look at the AVK conference programme now here.

You can register online here.

Airbus is outstripping Boeing. At the world’s largest aviation trade show held recently at Le Bourget near to Paris, the competition between the two largest aircraft makers for the custom of the airlines dominated the news coverage. The Europeans attracted 730 orders (418 of which were binding) to a total value of roughly EUR 50 billion whereas the Americans “merely” posted 142 orders (58 of which binding) worth EUR 15 billion.

The Airbus A320 NEO is to be launched in 2015 and consumes 15 percent less fuel than the current model (photo: Airbus/Fixion).

Read Full Post

When I first met Arwed on our Composites Show in Stuttgart 2007 we had some nice chat about his new developments about car rims made of carbon.

A few weeks ago we met each other again and he told me that development went well but he had some challenges regarding german law for using rims on
german streets. Although there are no thermal problems by heating the discs i.e. government gave him note that these kind of rims are not desired. Read Full Post

After the success of COMPOSITES EUROPE, the European Trade Fair and Forum for Composite Materials, Technology and Applications, the trade fair organiser Reed Exhibitions is launching a new event in Asia.

Read Full Post

GLENWOOD SPRINGS, CO — 29 June 2010. Fiberforge announces today that Fraunhofer ICT and Fiberforge have started a strategic collaboration on R&D projects for various industries such as, automotive and aerospace. As part of this collaboration, Fraunhofer ICT will be installing a RELAY® Station 2000 at its state-of-the-art thermoplastics research center. This will be the first RELAY Station installation in Europe offering clients the ability to develop and demonstrate the production of thermoplastic advanced composite structures upward of 2 m x 2 m (80 in. x 80 in.) in size on a full-scale production work cell.

Read Full Post

11 March this year saw the launch of the new international “Composites” Masters course, being held in English, at the Private University of Applied Sciences in Göttingen.  This means that now, for the first time in Europe, there is a course of studies aimed at resolving the international shortage of graduates in fibre-reinforced plastics. 21 engineers from Spain, France, the United Kingdom, India and Germany will now become experts in carbon composites during the three-semester course.

Read Full Post

When the new Airbus A350 XWB (XWB stands for eXtra Wide Body) takes off on its maiden flight in two years time, this will also represent a milestone for the composites industry. 50% of the fuselage of the wide-bodied aircraft, which is being developed as a competitor to the Boeing 787, is made of composite materials. Last summer, Airbus purchased Read Full Post

Dear reader, sympathizer and friends,

an eventful year is drawing to its end.
We would like to thank you very much for reading our blogpost, visiting our show or telling us what is going wrong or fine.

The year 2009 has the sub-title “year of the crisis”. But we never gave up. We always tried to find a solution – pretty often a creative solution. Our shoulders were closed against the vortex downward.

What will be in 2010 ? – Outlook.

Few days ago we saw that the first plane with extra-easy carbon fibers for Engine tail, Thrust reversing housing etc. is able to fly – and will save 20% of fuel.

In Copenhagen the world discusses over reduction of Co2 – We need stronger energy sources apart from the atoms energy – wind mills with especially long reinforced carbon fibres wings will play a serious role.

My last point: The weight of the battery in electric vehicles must become balanced somehow to protect the positive effects.

Fiber reinforcements are able to change characteristics of plastics. With reinforced plastics designers are able to design more beautiful things and it makes our life lighter. Who would like me a contradicting, if I said that: We improve the world with Composites!

We wish you and your familiy happy holidays as well as a healthy, peaceful and successful new year 2010!

Best regards,

Frank Mertz
Sales Manager COMPOSITES EUROPE

Looking forward to your comment:
Frank.Mertz@reedexpo.de
+49 (0) 211 90191 227
http://www.twitter.com/ceshow

Mit 313 Ausstellern hat am Dienstag in Stuttgart die COMPOSITES EUROPE begonnen. Drei Tage lang zeigt die Fachmesse die neuesten Technologien und Produkte rund um die gesamte Wertschöpfungskette der faserverstärkten Kunststoffe.

COMPOSITES EUROPE ist die größte Messe im größten europäischen Markt für Verbundwerkstoffe. Mehr als 300 Aussteller präsentieren Innovationen und Neuheiten rund um die Herstellung, Verarbeitung und Anwendungen von innovativen Werkstoffen: u.a. Verbundwerkstoffe für Leichtbau in Automotive, Aerospace, Bau und Konstruktion. Die Messe zeigt die gesamte Wertschöpfungskette für verstärkte Kunststoffe vom Rohmaterial bis zum Fertigprodukt sowie die neuesten Technologien in Verarbeitung und Fertigung von Verbundwerkstoffen.

Öffnungszeiten
27. & 28. Oktober: 9.00 – 18.00 Uhr
29. Oktober: 9.00 – 17.00 Uhr

Adresse
Neue Messe Stuttgart; Messepiazza 1; 70629 Stuttgart

Eingabe Navigationssystem
Flughafenrandstraße/Flughafen
70629 Stuttgart (bei älteren Systemen: 70629 Leinfelden-Echterdingen)

With new themes, new special forums and a 15-percent increase in exhibitor numbers, the COMPOSITES EUROPE 2009 specialist fair is gaining momentum. At its fourth edition to be held from 27 to 29 October in Stuttgart, more than 300 exhibitors will present technologies and products covering the entire value creation chain of fibre-reinforced plastics. The spotlight will be on innovative solutions for important application industries such as vehicle construction, aircraft construction and aerospace as well as the building and construction sector.

Key players of the industry such as AOC Resins, Exel Composites and Huntsman will once again be present in Stuttgart. In Krauss-Maffei, RAMPF Tooling, Henkel, DSM Composites Resins, Carbon Composites e.V., Zoltek and Cam Elyaf, however, COMPOSITES EUROPE could also win major new exhibitors this year. The organisers succeeded in bringing almost the entire sector of automated cutting to Stuttgart with Gerber Technology, Lectra, Expert Systemtechnik, Topcut-Bullmer and Zünd Systemtechnik AG.

Read Full Post